|
The component properties of the panels enable them to be used in exterior or
interior environments.
All Prioi range patterns are available in Glass Reinforced (GRC) or steel reinfoced concrete.
Panels can be made up to 3.5meters in length and up to 3meters wide in a
variety of shapes and profiles, subject to weight and site conditions i.e.
stairs, corners, lifts etc. Alternatively onsite manufacture can be undertaken, at an increased cost per
panel.
A typical Steel reinforced concrete panel 2m x 0.5m x 35mm thick.
(1 meter square) = 90kg
Thinnest panels 30mm
A typical Lytag and recycled glass mix panel 2m x 0.5m x 35mm thick.
(1 meter square) = 60kg
Thinnest panels 30mm
A typical Glass reinforced panel 2m x 0.5m x 20mm thick.
(1 meter square) = 30kg
Panels can be made as thin as 8mm depending on application. (standard 20mm)
All panels are treated with a waterproof sealent before delivery. Either
matte or semi-gloss depending on clientıs requirements.
All spillages should be wiped as quickly as possible with clean warm water,
particularly if the substance is aggressive such as red wine, coffee, or
oil. In most cases this initial treatment will minimise the requirement for
more formal cleaning.
All panels are fire retardant.
All panels have high modular strength.
|
